Speed Up Your Firefox ....!

The award-winning Web browser is now faster, more secure, and fully customizable to your online life. With Firefox 2, the newly added powerful new features that make your online experience even better.
some time we still has to face slow speed even with Firefox, which is considered as the best and fastest web browser in market, You can double the speed your mozilla firefox than what you are getting now,
Want to know How..? just continue reading..its really easy and simple..

Mozilla Firefox is a fast, full-featured web browser that makes browsing more efficient than ever before. Firefox includes pop-up blocking, a tab-browsing, integrated Google searching, simplified privacy controls that let you cover your tracks more effectively, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Version 2 features an updated theme and user interface, built-in phishing protection, enhanced search capabilities, improved tabbed browsing, and inline spell checking.

check out the "Read more" link the real tips is there which can double the speed of your mozilla Firefox..


Lets not Waste any more time straightaway we shall begin with the tricks.
Here we go

1. Open Firefox..
2. Type about:config in the address bar and press Enter.


HTTP PIPELINING
HTTP is the application-layer protocol that most web pages are transferred with. In HTTP 1.1, multiple requests can be sent before any responses are received. This is known as pipelining. Pipelining reduces page loading times, but not all servers support it.
In the filter bar type network.http.pipelining. Make sure under the value field is says true. If not double-click to set it.
Return to the filter bar and type network.http.pipelining.maxrequests. Double-click this option and set its value to 8.

HTTP PROXY
Go to the filter bar and type network.http.proxy.pipelining. Once it opens double-click it to set it to true.

DNS
IPv6 was designed in part to solve the problem IPv4 will soon be facing: the exhaustion of all possible IP addresses. Mozilla implemented IPv6 support in early 2000, but that support did not receive widespread testing until recently as IPv6-capable OSs and network software/equipment became more common.
One particular bug that has appeared exists not in Mozilla, but in IPv6-capable DNS servers: an IPv4 address may be returned when an IPv6 address is requested. It is possible for Mozilla to recover from this misinformation, but a significant delay is introduced.
Type network.dns.disableIPv6 in the filter bar and set this option to true by double clicking on it.

NGLAYOUT INITIALPAINT DELAY
Mozilla applications render web pages incrementally - they display what's been received of a page before the entire page has been downloaded. Since the start of a web page normally doesn't have much useful information to display, Mozilla applications will wait a short interval before first rendering a page. This preference controls that interval. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter nglayout.initialpaint.delay in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 0 and click OK.


BROWSER CACHE MEMORY CAPACITY
When a page is loaded, it can be cached so it doesn't need to be rerendered to be redisplayed. This preference controls the maximum amount of memory to use for caching decoded images and chrome (application user interface elements). Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter browser.cache.memory.capacity in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 65536 and click OK.

UI SUBMENU DELAY
This preference controls the time a menu takes to open a sub-menu. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter ui.submenuDelay in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 0 and click OK.

PLUGIN EXPOSE FULL PATH
This preference shows full path to plugins in about:plugins. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Boolean from the pop-up menu.
Enter plugin.expose_full_path in the New boolean value pop-up window and click OK.
You will be prompted to choose the value for the new boolean. Select true and click OK.

CONTENT INTERRUPT PARSING
This preference controls whether the application will interrupt parsing a page to respond to UI events. It does not exist by default.
Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Boolean from the pop-up menu.
Enter content.interrupt.parsing in the New boolean value pop-up window and click OK.
You will be prompted to choose the value for the new boolean. Select true and click OK.

CONTENT MAX TOKENIZING TIME
Rather than wait until a page has completely downloaded to display it to the user, Mozilla applications will periodically render what has been received to that point. This preference controls the maximum amount of time the application will be unresponsive while rendering pages.
Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter content.max.tokenizing.time in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 2250000 and click OK.

CONTENT NOTIFY INTERVAL
This preference specifies the minimum amount of time to wait between reflows. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter content.notify.interval in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 750000 and click OK.

CONTENT NOTIFY ONTIMER
This preference specifies whether to reflow pages at an interval any higher than that specified by content.notify.interval. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Boolean from the pop-up menu.
Enter content.notify.ontimer in the New boolean value pop-up window and click OK.
You will be prompted to choose the value for the new boolean. Select true and click OK.

CONTENT NOTIFY BACKOFFCOUNT
This preference controls the maximum number of times the content will do timer-based reflows. After this number has been reached, the page will only reflow once it is finished downloading. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter content.notify.backoffcount in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 5 and click OK.

CONTENT SWITCH THRESHOLD
The user can interact with a loading page when content.interrupt.parsing is set to true. When a page is loading, the application has two modes: a high frequency interrupt mode and a low frequency interrupt mode. The high frequency interrupt mode interrupts the parser more frequently to allow for greater UI responsiveness during page load. The low frequency interrupt mode interrupts the parser less frequently to allow for quicker page load. The application enters high frequency interrupt mode when the user moves the mouse or types on the keyboard and switches back to low frequency mode when the user has had no activity for a certain amount of time. This preference controls that amount of time. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
Enter content.switch.threshold in the New integer value pop-up window and click OK.
You will be prompted to enter a value. Enter 750000 and click OK.

Now you are Done.. just restart the Mozilla Firefox and connect to the internet and see the experience the new speed of your Firefox

EnJOy Browsing.................

SOURCE :

.

Increase the Speed Of Your Broadband Internet Like Never Before..!

Use the following regestry tweag to increase the speed of your broadband connection, initially I had faced a lot of problem with my broadband internet and i can guess still many people is having lots of problem with their internet connection,
Here i am shairing some regestry tweag that i collected from internet through many sites and forum and these helped me alot to improbe the speed of my internet and I want that all of my visitors get benefit from this.

The following tweak applies only to Windows XP Professional edition.

The default system behavior is that all 100% bandwidth is available, however, if there is a running application that indicates to the OS it needs to send high priority/real time data, then as long as it has the socket open, Windows XP will restrict “best effort” traffic to 80% of the bandwidth so that high priority traffic can be accommodated. Basically, applications can make this request to the operating system for QoS support using the QoS application programming interfaces (APIs) in Windows and this only applies if a specific app is requesting QoS.

Since it is a long post click on the "Read more" link to expand it to its full length and before doing this make sure you have enough time in your hand and be very careful, whenever you are editing any registry in in your OS please make a backup of the existing part..



If you'd like to change how much bandwidth is reserved for QoS (the default is 20% of the total bandwidth), do the following:

1. Make sure you're logged in as "Administrator" (not just any account with admin privileges).
2. Navigate to START>Run and type: gpedit.msc
3. Navigate to Local Computer Policy > Administrative Templates > Network > QOS Packet Scheduler
4. In the right window, double-click the limit reservable bandwidth setting
5. On the setting tab, check the enabled setting.
6. Where it says "Bandwidth limit %", change it to read 0 (or whatever percentage you want to reserve for high priority QoS data)
7. Click OK, close gpedit.msc

Under START > My Computer > My Network Connections > View Network Connections, right-click on your connection and under Properties (where it lists your protocols), make sure QOS Packet Scheduler is enabled.

The tweak desribed below helps boost priority for DNS & hostname resolution in general. What this means is, it helps web pages load faster, and has negligible effect on downloads (not counting the couple of ms gain with the host resolution at connect-time).

Applying this tweak assumes some proficiency in editing the Windows Registry using Regedit (Start > Run > type: regedit). As always, backup your Registry before making any changes so you can revert to the previous state if you don't like the results.

Host Resolution Priority Tweak
host name resolution priority
Windows 2k/XP

First, open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider



Note the following lines (all hex dwords):
Class = 008 ( - indicates that TCP/IP is a name service provider, don't change.

LocalPriority = 1f3 (499) - local names cache
HostsPriority = 1f4 (500) - the HOSTS file
DnsPriority = 7d0 (2000) - DNS
NetbtPriority = 7d1 (2001) - NetBT name-resolution, including WINS

What we're aiming to do is increase the priority of the last 4 settings, while keeping their order. The valid range is from -32768 to +32767 and lower numbers mean higher priority compared to other services. What we're aiming at is lower numbers without going to extremes, something like what's shown below should work well:

Change the "Priority" lines to:
LocalPriority = 005 (5) - local names cache
HostsPriority = 006 (6) - the HOSTS file
DnsPriority = 007 (7) - DNS
NetbtPriority = 008 ( - NetBT name-resolution, including WINS

Remove the limit on TCP connection attempts

Windws XP SP2 introduces a few new twists to TCP/IP in order to babysit users and "reduce the threat" of worms spreading fast without control. In one such attempt, the devs seem to have limited the number of possible TCP connection attempts per second to 10 (from unlimited in SP1). This argumentative feature can possibly affect server and P2P programs that need to open many outbound connections at the same time.

Rant: The forward thinking of Microsoft developers here is that you can only infect 10 new systems per second via TCP/IP ?!?... If you also consider that each of those infected computers will infect 10 others at the same rate:
second 1: 1+10 computers
second 2: 10+10*10 computers (110 new ones)
second 3: 10+100*10 computers ( 1110 new ones)
second 4: 10+1000*10 computers (11110 new ones)
....
all the way to 10*60 + 10^60 computers in a single minute (that's a number with 60 digits, or it would far exceed Earth's population). Even if we consider that 90% of those computers are unreachable/protected, one would still reach ALL of them within a minute.

In other words, even though it is not going to stop worm spreading, it's going to delay it a few seconds, limit possible network congestion a bit, and limit the use of your PC to 10 connection attempts per second in the process ! I have no problem with the new default setting limiting outbound connection attempts. Still, users should have the option to easily disable or change this setting. I might be going out on a limb here, but ever since the introduction of Windows XP I can't help thinking that I dislike all the bult-in Windows "wisardry" in a sense that the system also limits user access. That irritating trend to ease the mental load on end users is somewhat insulting, considering that Windows is to make the more "intelligent" choice instead of the end user, as well as limit their access to tuning such settings...
End of rant.

With the new implementation, if a P2P or some other network program attempts to connect to 100 sites at once, it would only be able to connect to 10 per second, so it would take it 10 seconds to reach all 100. In addition, even though the setting was registry editable in XP SP1, it is now only possible to edit by changing it directly in the system file tcpip.sys. To make matters worse, that file is in use, so you also need to be in Safe mode in order to edit it.

You only need to worry about the number of connection attempts per second if you have noticed a slowdown in network programs requiring a number of connections opened at once. You can check if you're hitting this limit from the Event Viewer, under System - look for TCP/IP Warnings saying: "TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts". Keep in mind this is a cap only on incomplete outbound connect attempts per second, not total connections. Still, running servers and P2P programs can definitely be affected by this new limitation. Use the fix as you see fit.

To change or remove the limit, you can use the following program:

Event ID 4226 Patcher v2.11

Recommended settings for Windows 2000 / XP

Windows 2000 & XP, unlike NT supports large windows as described in RFC1323 ( the 'RcvWindow' has a maximum value of 2**30 rather than 64K), and includes some other improvements over its predecessors you can use to speed up any TCP/IP transfers. , the descriptions and other options are added to provide you with better understanding and enable you to customize your settings.

All the following entries, unless otherwise noted should be placed in the Windows 2000/XP Registry under the key

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

TCPWindowSize

The value of TCP Window in the Windows 2000 Registry is DWORD, representing number of bytes, with range from 0 to 2^30. The recommended values (in red) optimize TCP for any high speed Internet connection and work best in most cases, however if you'd like to use a custom value follow these guidelines:

For best results, the TCPWindow should be a multiple of MSS (Maximum Segment Size). MSS is generally MTU - 40, where MTU (Maximum Transmission Unit) is the largest packet size that can be transmitted. MTU is usually 1500 (1492 for PPPoE connections). To determine the MTU value of your ISP, check out the Advanced Registry Editing section of our site.

There are three places in the Windows 2000 Registry where you can add the TCP Window parameter.

HKLM/SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
GlobalMaxTcpWindowSize="256960" (DWORD, number of bytes) Valid range is from MSS to 2^30. Add the value as a decimal. Note: For best results RWIN has to be a multiple of MSS lower than 65535 times a scale factor that's a power of 2, i.e. 44 x 1460 = 64240 x 2^2 = 256960. If you choose to use a RWIN lower than 65535, you can simply make it multiple of MSS and turn scaling off (Tcp1323Opts=0)

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
TcpWindowSize="256960" (DWORD, number of bytes) Valid range is from MSS to 2^30. Add the value as a decimal. TcpWindowSize can also exist under TcpipParametersInterface - if added at this location, it overrides the global setting for this particular . Note (10/20/00): Seems MS has found another bug in Windows 2000, the TCPWindowSize should be configured with the global setting (GlobalMaxTcpWindowsSize) rather than this one - Q263088

Note: For best results RWIN has to be a multiple of MSS lower than 65535 times a scale factor that's a power of 2, i.e. 44 x 1460 = 64240 x 2^2 = 256960. If you choose to use a RWIN lower than 65535, you can simply make it multiple of MSS and turn scaling off (Tcp1323Opts=0)

Tcp1323Opts

Tcp1323Opts is a necessary setting in order to enable Large TCPWindow support as described in RFC 1323. Without this parameter, the TCPWindow is limited to 64K.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Tcp1323Opts="1" (DWORD, recommended setting is 1. The possible settings are 0 - Disable RFC 1323 options, 1 - Window scaling but no Timestamp options, 3 - Window scaling and Time stamp options.)

Note: Tcp1323Opts="3" might help in some cases where there is increased packet loss, however generally you'll achieve better throughput with Tcp1323Opts="1", since Timestamps add 12 bytes to the header of each packet.

DefaultTTL

DefaultTTL determines the time in seconds and the number of hops a packet lives. While it does not directly affect speed, a larger value increases the amount of time it takes for a packet to be considered lost, discarded and retransmitted. A value that's too small can cause packets to be unable to reach distant servers at all.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
DefaultTTL="64" (DWORD, recommended setting is 64. Other settings that are widely used are 128 and 32)

EnablePMTUDiscovery

When set to 1 (True), TCP attempts to discover MTU automatically over the path to a remote host. Setting this parameter to 0 causes MTU to default to 576 which reduces overall performance over high speed connections. Note that this setting is different than our Windows 9x recommendation.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
EnablePMTUDiscovery="1" (DWORD - boolean, valid settings are 0-->False and 1-->True. Many connections perform better with this entry at 1, however, if you prefer to set your upstream to send fixed 1500 packets, you might want to use 0 instead). When set at 1, establishing connections and initial transfer speed might slow down a bit, however you will get better throughput if somewhere in the path large packets need to be fragmented.

EnablePMTUBHDetect

Setting this parameter to 1 (True) enables "black hole" routers to be detected, however it also increases the maximum number of retransmissions for a given segment. In most cases you'd want to keep BHDetect to 0 (False).

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
EnablePMTUBHDetect="0" (DWORD - boolean, valid settings are 0-->False and 1-->True. Recommended setting is 0)

SackOpts

This parameter controls whether or not SACK (Selective Acknowledgement) support is enabled, as specified in RFC 2018. SACK is especially important for connections using large TCP Window sizes.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
SackOpts="1" (DWORD - boolean, recommended setting is 1. Possible settings are 0 - No Sack options or 1 - Sack Option enabled).

TcpMaxDupAcks

This parameter determines the number of duplicate ACKs that must be received for the same sequence number of sent data before "fast retransmit" is triggered to resend the segment that has been dropped in transit.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
TcpMaxDupAcks="2" (DWORD - range 1-3, recommended setting is 2).

Patches

This Includes

1. sguide_tweak_2k.zip

Description: Generic patch for Windows XP and Windows 2000 (all versions). This patch will optimize your TCP/IP Registry settings for high speed Internet connections. To install, extract the .inf file first, then double-click (or right-click on filename and choose install from the pull-down menu) and reboot for changes to take effect.

2.sguide_tweak_2k_pppoe.zip

Description: Generic patch for Windows XP/2000 and DSL connections using PPPoE. This patch will optimize your TCP/IP Registry settings for high speed Internet connections. It is specifically designed for PPPoE DSL connections. To install, extract the .inf file first, then double-click (or right-click on filename and choose install from the pull-down menu) and reboot for changes to take effect.

The following patch increases Web page loading speed, by doubling the number of possible concurrent open connections. For example, imagine a web page has 20 images and some text - in order for your browser to get all these files, it opens 2 or 4 concurrent connections, depending on the Web server. Increasing the number of open connections allows for faster retrieving of the data. Please note that the patch sets some values outside of the HTML specs. If you decide to install it, backup your Registry first. Changes will take effect after you reboot.

OS: Windows 2K/XP/2k3

TCP OPTIMISER
Description: The TCP Optimizer is a free, easy Windows program that provides an intuitive interface for tuning and optimizing your Internet connection. Just download and run, there is no installaion required. The program makes it easy to find the best MTU and RWIN values, test latency and tweak all the important broadband related registry parameters. The Optimizer can be helpful with tuning any Internet connection type, from dialup to Gigabit+
Get it from here

HAVE FUN......!!!!!!!!!!!!!!!!!
.

Give Your Vote, For the Best Post...

It has been around two month since I had started blogging, till then I had given my best to provide different type of post in different topic, what i noticed that day by day the number of visitors in my blog is increasing simultaneously my adsense income through google ads also increased, this makes a sense to me that all my post are helpful to my visitors and i am really thankful to all my visitor who had visited my blog.
Now i would like to have my viewer feedback regarding the post on my blog. It is not possible to have direct interaction with all of you, what i am going to do is that i am making a poll which contain some of my best post and I want everyone to vote for the best post according to them,

Here i am mentioning the name of some of my best post.

....(1).... Enjoy a Happy and Sleep'y Downloading, During 2to 8.

....(2).... Maximize your downloading speed from Utorrent.

....(3).... How To View and Downlod Deleted YouTube Video.

....(4).... Placement Paper of Some Leading IT Companies.

....(5).... The All In One, Nokia N95.

If you want to review the above mention post, just click over it and it will redirect you there.
So please vote in the voting poll given below and let me know the particular topic on which I should concentrate in my blogsphere.
Apart from these five post there are four more post are there in my blog it is not necessary that you have to vote only out of these five, you ca vote for any post out the nine post in my blog, In that case please write the post title in the "others" of the polling box.
Your suggestion and comments are always welcome to my blogsphere, so please leave them in my comments box.

Here is your polling box :

Test Your Bandwidth Speed with Speedometer

Check your exact internet connection speed from the speedometer, it is a absolutely free service provided to you by A BELTRÓNICA. Check it yourself as many time as you want and maintain a regular graph , to challenge your internet provider.

This speedometer is a very important tool, of high precision and regularly calibrated so that it allows you to measure the speed of your access, as much downloads as uploads.
The speed of your Internet connection not only depends on the technical characteristics of your access as also of the traffic, day and hour. Therefore you must make some measurements to know the stability of your access.
A window with reports and graphs of all the tests, will be available to analyze the stability of your access.
When the variation between each reading will be inferior 5%, your access is considered steady. The speed of your access also varies in function of the place for where you is to receive or to send. This speedometer is a powerful tool that allows you to measure the speed of its access in the communications inside your country or in the international ones.

1. To measure the speed of your access inside your country

In this case, before making the 1.st measurement, your country or region, must be selected. If you don’t find your country, you must select the nearest one. For ex.: if you will be in United Kingdom, must be selected United Kingdom before the measurement being initiated. Once the country is selected, click in "TEST NOW" and waits, because in about 10 s, will be informed of the download measurement. After receiving the download value, waits again about 10 s and will be informed of the upload value. At this moment, a window with the report, table of measurements and graphs appears. If you to intend to make new measurements to verify the degree of stability of your access, click in "NEW TEST" and will come back to wait about 10 s receiving the download information and more about 10 s receiving from upload. You can in the end of each test, to click again in "NEW TEST", if you to intend some tests for better improvement of the degree of stability of your access. In the end, you can analyze in the window of the report, the graphs and tables of measurements on all the deed tests.

click this speedometer given below to know the speed of your bandwidth for download as well as for upload..


You ca also get it from the original home page of ABELTRONICA. Get it from here.
Or click here it will redirect you directly to the speedometer. this wonderful free service is brought to you by ABELTRONOCA, visit their home site not only checking your bandwidth speed also if you want you can put this speedometer on to your site , a step by step instruction is given there for this...

Enjoy a Happy and a Sleep'y Downloading , During 2 to 8.

It is really difficult for us to use the full length of free hour or the happy hour, i.e (2 am to 8 am) from BSNL data-one broadband (Rs 500plan) which give a limit of 2.5 GB of data transfer during normal time, if we want to download something like game , movie or some big file then we really need to use the full length of free hour, but it is not possible for us to wake up at 2’0 clock in the night and start up the computer manually to start downloading the file… In that case we need an automatic way, in which the computer will start automatically at 2’0 clock and start downloading the given file. Many third party software are available for automatic startup, but they do not work properly.

While searching through the tutorial section of thinkdigit forum, one person named
"yrana2002" has really posted a very good topic regarding automatic startup of computer without any third party software. I personally tried it and its really working for me…

Here are the step by step process for that :

Step : 1. Configure your BIOS, for an automatic start up .

Instead of using third party softwares for automatic startup, we use a utility now available in most BIOS.
Note: This one is for Phoenix Award BIOS
(1) Enter your BIOS at bootup by pressing del, F1, enter, etc.

(2) Go to Power Management Tab and select the option of Automatic Power On.

(3) Chose The Option for Scheduled Power on-> Set it Enabled-> Set it Daily-> Enter the time as 02/05/00 for dataone->Chose Startup Sequence as Automatic-> Press Esc.->Got to Exit and choose Save & Exit.

Note: You may change the timings as per your appropriation. However, bsnl's clock may not match with yours.

If u use passwords for logging in, you can follow these steps:

(i) Go to the Start Menu and the Run box.

(ii) Type in the following:

control userpasswords2

now click OK

(iii) In the new Windows that appears select the account you wish to make the primary logon.

Now uncheck the "Users must enter a username and password..." box.

(iv) Hit Apply and a dialog box will appear asking you to confirm the selected users password.

Step : 2. Configure your download accelerator or bittorrent client.

This section explains how to configure torrent clients for automatic startup & downloading.

It uses a windows utility called as 'Task Schedular'
.

To open it,
Go to Start->Programs->Accessories->System Tools->Scheduled Tasks.

(1) Click Add a new task.

(2)A windows will appear. Select Next

(3)Select your torrent client from the list or click browse & then click next.

(4) Select the option of daily"Daily" and click next.

(5) In the start time column, fill in 2:10:00 AM and select Everyday and click Next.

(6) There will be fields for username & password. The username field would have been filled automatically. If not, then enter the username you use to log on to your PC. In the password section, enter your password, if you use one. If not, leave them blank and click next.

Note: If u dont give a correct password or no password, then it will give you an error. Do not worry, check at the end of this section

(7)When the task is created, right click the task and select Properties.

If u have not entered the password or have got an error when adding the task, select 'Run only if logged on'.

(8) Click The Settings Tab.
Check "Stop if task runs for" and enter values as 5 hours 37 minutes. ( again it depends upon you). Click Ok.

This configures your client to run at 2:10 A.M. and shut down automatically at 7:47A.M.

For configuring the client settings, ( Here is an example of Bitcomet)
Click Prefereces-> Go To appearance and check the options of 'Auto -resume tasks on startup'.

This ensures that whenever the client starts, it will automatically start downloading the tasks.
Imp: Whenever closing the client, ensure that you don't stop the tasks or else the next time, they won't start automatically.

Some users may be using DAP as their download managers. For them,
1. Start Download Accelerator Plus->Go to Tools Menu->Options.

2. In General, check "Launch DAP on startup".

3. Select Schedular and check "Start Schedular at" and select Daily and enter start time as 2:10:00 A.M. and also check "Stop Schedular at" and enter values as 7:50:00 A.M.
You may also want to shut down the pc. For that check the options...
'Hang up Modem', 'Quit Download Accelerator' and 'Shutdown computer'.
Click close

Step : 3. Make a new schedule task for an Automatic Shutdown.
Now, the final step is shutting down the pc after the downloading.
We saw how it can be done with DAP above.
For others, here's a guide..
(1) Right click on the Desktop.
Left click on New > Shortcut.

(2) In the Type the location of the item: textbox enter
%windir%\System32\shutdown.exe -s
Click the Next > button.

(3) In the Type a name for this shortcut: textbox enter Shutdown. Click Finish.

This creates a shortcut on the desktop which shuts down the pc.

(4) Now, again go to Task Schedular->Add new task.
Choose the file "shutdown" just created. Click Next..

(5) Again, select perform this task Daily, choose start time as 7:53 A.M. Click Next...

(6) The username field would have been filled automatically. If not, then enter the username you use to log on to your PC. In the password section, enter your password, if you use one. If not, leave them blank and click next.

(7) Click Finish. Now, again right click on task, click properties and ensure that the 'Run only if logged on' box is checked. Click OK.

Now, the procedure will be as follows:

Startup at 2:05 AM,
Client Starts at 2:10 AM ( Download start at 2:10AM)
Client stops at 7:47AM ( Download stop at 7:50AM)
Computer shuts down at 7:53 AM.

This wonderful tutorial was originally posted by "yrana2002" it really worked very well for me and I thanks him for this.
For more information regarding this tutorial, Click here